Overlay, Display
This part is NO LONGER AVAILABLE. You cannot purchase this part.
|
|
|
Display overlay / switch panel decal.
NOTE: The electronic board is not included with this part.
NOTE: Removal of backing paper voids warranty. DO NOT peel the backing from the new overlay and/or keypad without electrically testing first. Connect the ribbon cable of the new overlay and/or keypad to the display electronics and test the part prior to removing the paper backing and complete installation. If you have the same problem as with the original part, please continue troubleshooting the unit to ensure the problem is the overlay / keypad. |
* Images may not be identical to part.
# |
Part Name (Click to view) |
BOM
Qty | 1 | NLA Overlay, Display | 1 | 2 | NLA Display board | 1 | 3 | Standoffs | 6 | 4 | NLA Board, Heart Rate PCB | 1 | 5 | NLA Console | 1 | 6 | Bracket, mounting, pickup, heart-rate | 1 | 9 | NLA Cable, Ribbon | 1 | 10 | grommet, hole, 1 1/2 dia. | 3 | 11 | lockwasher, 1/4, pltd. | 10 | 12 | bolts, 1/4-20 x 5/8 pltd. | 6 | 13 | Washer, Locking | 38 | 14 | bolts, 5/16 - 18 x 5/8 pltd. | 12 | 15 | Decal, Scifit | 2 | 17 | screw, 10-32x.5, black, b.h., socket cap | 29 | 18 | NLA Cover, Right | 1 | 19 | Decal, Scuff Plate | 2 | 20 | Crank Arm Pair | 1 | 21 | Bolt, Crank | 2 | 22 | Pedal, Set | 1 | 23 | Power Cord, 110 | 1 | 24 | NLA manual, operator's | 1 | 25 | decal, serial number | 1 | 26 | NLA power supply, (lower), serial | 1 | 27 | plate, mounting, electronics, lower | 1 | 28 | decal, warning, hi voltage | 1 | 31 | nuts, 10-32, pltd. | 4 | 32 | lockwasher, #10, | 8 | 33 | Transformer | 1 | 36 | bracket, PCB, lower | 1 | 37 | extrusion, rail, roller, 34" | 2 | 39 | NLA endcap, 3 | 4 | 43 | Wheel, Roller | 20 | 45 | rod, lock | 1 | 48 | Bracket, Adjustment | 1 | 50 | NLA Bracket | 1 | 51 | Handlebar, Seat | 1 | 54 | NLA frame, seat, Iso1000r | 2 | 55 | Pad, Seat back, Black | 1 | 56 | Pad, Seat Bottom | 1 | 57 | NLA knob, ball | 1 | 59 | Bracket, Spring | 1 | 61 | seat, base, iso1000r, weldment | 1 | 62 | track, adjustment, stainless | 1 | 64 | bolts, 5/16-18 x 2 1/2, hex, pltd. | 8 | 66 | NLA Cover, Left | 1 | 67 | grip, 1" dia., 8" long, rubber | 1 | 68 | holder, bottle, water | 1 | 69 | mount, display, weldment | 1 | 70 | Idler | 1 | 71 | Bracket, sensor, speed | 1 | 72 | NLA sensor, speed, cable, assy | 1 | 75 | Belt, Drive | 1 | 78 | NLA pulley, poly-V, 6" dia | 1 | 79 | key, square, 1/4 x 1/4 x 1 | 1 | 80 | Tape, Pickup Speed | 1 | 81 | NLA Brake assembly | 1 | 82 | plate, side, drivetrain, right | 1 | 84 | housing, bearing, jackshaft | 2 | 88 | housing, bearing, bi-direct. Shaft | 2 | 91 | Receptical, Daisy chain | 1 | 92 | Power Entry Module | 1 | 93 | NLA Plate, Power Entry | 1 | 96 | Bracket, Wheel, Right | 1 | 97 | wheel, front | 1 | 98 | grommet, hole, 1" dia., | 1 | 99 | Bracket, Wheel, Left | 1 | 100 | NLA cover, pedal, right | 1 | 101 | hub, sprocket, press-fit, 16T, centered | 2 | 102 | shaft, jack | 1 | 103 | shaft, spacer | 1 | 104 | NLA shaft, bi-directional | 1 | 105 | NLA hub, sprocket, press-fit, 16T, offset | 2 | 106 | NLA sprocket, press-fit, 16T | 4 | 107 | Chain | 2 | 108 | cover, electronics, lower | 1 | 109 | NLA Spindle Upgrade Kit | 1 | 110 | Housing, Bearing | 4 | 111 | Bearing | 2 | 112 | nut, jam, 5/16-18, pltd. | 8 | 113 | NLA cover, pedal, left | 1 | 114 | support, cover | 1 | 116 | bracket, tension, lower | 2 | 117 | bracket, tension, upper | 2 | 119 | plate, side, drivetrain, left | 1 | |
|
